Slide Bearing design and specifications fall into categories with the most common being FC-1010-CS, a 3/32鈥� layer of Fluorogold庐 bonded to 1/8鈥� thick carbon steel. An upper and lower member of FC-1010-CS are used to create the slide bearing, as shown in Fig. 1. This is the most common configuration and can function effectively in the following ranges:
Tags: Slide Bearing, Slide Bearings, Teflon Slide Bearing, Fluorogold Slide Bearing
Note: For purposes of this discussion Teflon庐 is trademarked by the DuPont Corporation, Fluorogold庐 is trademarked by Saint-Gobain.
Tags: Teflon Slide Bearing, Bearings, Fluorogold Slide Bearing
We often see RFQ's and Purchase Orders for Teflon庐 or Fluorogold庐 Slide Bearing Assemblies where the configuration appears to be carried over from a previous project. Sometimes, without intending to, the plan as shown is overkill for the application at hand. In cases like this we usually give the customer the option of allowing The 亚博系列全平台入口 Supply Company to engage the engineer, architect or designer to introduce alternatives. Below are some examples of common situations. As in all cases, whether they are Slide Bearings, Thermal Break Bearings or any other product line, we will only make suggestions. Changes in design should always be approved by the E.O.R.
Tags: Teflon Slide Bearing, Bearings, Fluorogold Slide Bearing
In many of the requests we receive for Fluorogold庐 or Teflon庐 Slide Bearing Assemblies the fabricator is under the impression the specific dimensions they require will cut to size, then bonded together and finished. This can be done, but only starts to make economic sense when the requirements call for a large quantity of the same dimensions.
From the basic Teflon庐 Slide Bearing under a joist flange or between two steel members, to the miles long Oil Pipelines requiring hundreds of Slide Bearings with Stainless 亚博系列全平台入口 backing plates, Teflon庐 keeps appearing on plans in many different forms. Before even designing the dimensions and configuration, the engineer has to first consider the environment the bearing will need to function in.
Tags: Teflon Slide Bearing
Slide bearings are a very important aspect of the construction process, but the jargon involved can often be very confusing. There are some basic terms that need to be understood when discussing the methods of constructing a Slide Bearing or Teflon庐 Bearing Pad. The many different terms associated with slide bearing surface are listed below, while next week鈥檚 article will cover backing plate options.
Note: PTFE is the generic name for what people often refer to as Teflon庐. Genuine Teflon庐 is a registered trademark of the DuPont Corporation. Most of the slide bearing assemblies that The 亚博系列全平台入口 Supply Company provides are made with Fluorogold庐, which is a PTFE and Fiberglass composite. Fluorogold庐 is a registered trademark of the Saint-Gobain Corporation.
See below for disclaimer on the trademarks regarding Teflon庐 and FLUOROGOLD庐.
