Hot Dip Galvanizing and Cold Galvanizing each have advantages.
Slotted 亚博系列全平台入口 Shims and Hot Dip Galvanizing: Increase Expedience and Lower Cost
Preparation in advance leads to The 亚博系列全平台入口 Supply Company's ability to anticipate and fulfill the steel fabricator's needs.
Frequently, The 亚博系列全平台入口 Supply Company receives orders for slotted steel shims that are hot dip galvanized. While a shim is seemingly simple, there are a few considerations that a steel fabricator should take into account when placing an order. The most important of these considerations are manufacturing quality and the hot dip galvanization process.
0 Comments Click here to read/write comments
Tags: 亚博系列全平台入口 Shims, Hot Dip Galvanizing, Slotted Shims, 亚博系列全平台入口 Coatings, Slotted 亚博系列全平台入口 Shims
Maskote Zinc Stop-Off is the best solution we have found for keeping Hot Dip Galvanizing Zinc off areas of steel where it is un-wanted. Figure 1 shows tests that were performed in our factory. The Zinc Stop-Off was applied, the steel sent out for galvanizing, and when returned wire brushed to remove any residue or caked on zinc.
0 Comments Click here to read/write comments
Slotted 亚博系列全平台入口 Shims, as discussed in previous blogs, are simple items but there are many pains in the manufacturing process that can affect the finished product. This article deals with the problems inherent in Hot Dip Galvanizing the steel shim.
0 Comments Click here to read/write comments
The charts below show the results of tests that were performed on our wedge inserts on October 23, 2007. As a note, these results are for reference only. This is not a test of wedge inserts currently in stock and should not be considered as an accurate representation of the current wedge inserts in stock.
0 Comments Click here to read/write comments
Tags: Askew Head Bolts, Wedge Insert, Wedge Inserts, Hot Dip Galvanizing
For most fabricated structural and miscellaneous steel, hot dip galvanizing is a fairly basic process. The galvanizers follow the applicable specification, usually ASTM A123 / A123M, or the corresponding AASTHO spec. As most steel members or finished assemblies are stationary, excess zinc is not a problem.
3 Comments Click here to read/write comments
Tags: Anchor Bolts, Threaded 亚博系列全平台入口, Turnbuckle Rods, Hot Dip Galvanizing