亚博系列全平台入口 Manufacturing Blog: Keeping it 亚博系列全平台入口

Slide Bearings - Stainless 亚博系列全平台入口 Backing Plates

Posted on Tue, Jan 12, 2016 @ 09:47 AM

Typical Teflon庐 Slide Bearing Assemblies are made with 3/32鈥� thick Fluorogold庐 bonded to a 1/8鈥� thick backing plate. (Note: These dimensions can be changed to any size and thickness required.)

Read More

Tags: Slide Bearings

Shims 鈥� 亚博系列全平台入口 vs. Plastic

Posted on Mon, Dec 14, 2015 @ 10:57 AM

Often our 亚博系列全平台入口 Fabricating customers require shims and choose them without considering material options. Slotted 亚博系列全平台入口 Shims are the default selection. Typically stamped from grade A-36 or grade 50 steel they offer tremendous compressive strength.

Read More

Tags: Shims

All Threaded Rod Grades, Coatings and Origin

Posted on Tue, Nov 10, 2015 @ 03:28 PM

All threaded rods come in a variety of steel grades, heat treating processes and coatings. For the 亚博系列全平台入口 Fabricator, it is fairly easy if the call outs are all written correctly on the shop drawings, but often the drawings blur the specifications.

Read More

Tags: Threaded 亚博系列全平台入口

EZ Sleeve Placement

Posted on Thu, Oct 15, 2015 @ 11:24 AM

The fastest and most cost efficient way to make Handrail Post holes is with correct use of EZ Sleeves. Set properly they can save countless man hours and expense.

Read More

Tags: EZ Sleeve

亚博系列全平台入口 Wedge Alignment Hole Angles

Posted on Wed, Sep 30, 2015 @ 02:16 PM

When making a steel wedge to order plans often call for a center hole that will be used for alignment or for locking the wedge in place. (See fig. 1) The hole can also be useful when removing a wedge while still under pressure.

Read More

Tags: 亚博系列全平台入口 Wedge

New Zinc Vent Hole Plug Sizes

Posted on Tue, Sep 22, 2015 @ 08:30 AM
Read More

Tags: Galvanized Vent Hole Plug

Masonry Anchor Angles

Posted on Wed, Aug 26, 2015 @ 10:49 AM

Most Masonry Anchors are intended to be welded to Columns or Beams running straight up and down; i.e. perpendicular to the foundation. This is true of Rod Anchors, sometimes referred to as Weld-On Wire Ties, shown in the photos below and Slotted Channel, which is also called a Gripstay鈩� Channel or Channel Slot Anchor.

Read More

Tags: Masonry Anchors

Slide Bearing Welds

Posted on Thu, Aug 06, 2015 @ 11:56 AM

An often overlooked issue with Slide Bearings is the system of welds. Before beginning the process the steel fabricator should understand what effect the weld will have on the Slide Bearing.

Read More

Tags: Slide Bearing

亚博系列全平台入口 Wedge vs. 亚博系列全平台入口 Shim

Posted on Mon, Jul 06, 2015 @ 02:24 PM

The Slotted 亚博系列全平台入口 Shim and the 亚博系列全平台入口 Wedge have some separate and some overlapping functions. The wedge has the ability to multiply force for lifting purposes. (To read more about the lifting force of the steel wedge, click here

Read More

Tags: Shims, 亚博系列全平台入口 Wedges, 亚博系列全平台入口 Wedge, 亚博系列全平台入口 Shims, 亚博系列全平台入口 Wedges Made To Order

Teflon庐, Slide Bearings, Thermal Breaks & Additional Uses in 亚博系列全平台入口 Construction

Posted on Wed, Jun 10, 2015 @ 04:07 PM
Read More

Tags: Teflon Slide Bearing, Bearings, Thermal Break