Slide Bearing Assembly with full welded elements.
Upper Element :
3/32" thick Fluorogold庐 bonded to 10 gauge carbon steel backing plate, full perimeter weld to the structural steel member or sole plate.
Lower Element :
3/32" thick Fluorogold庐 bonded to 10 gauge carbon steel backing plate, full perimeter weld to the structural steel member or sole plate.
Note: Slide Bearing can have a recessed lip of any width. 1/4" wide is the most common.
Loads : 75 psi to 2,000 psi
Temperature : -320掳 to +400掳
Slide Bearing backing plates can be:
Carbon 亚博系列全平台入口 (CS)
Stainless 亚博系列全平台入口 (SS)
Corten 亚博系列全平台入口 (CT)
Aluminum (AL)
Galvanized Carbon 亚博系列全平台入口 (GL)
Galvanizing can be Hot Dip or Electroplated
Overall height of the Slide Bearing can be increased by increasing the thickness of the element :
FC-1010-CS 10 gauge ( approx 1/8")
FC-1037-CS 3/8" thick plate
FC-1025-CS 1/4" thick plate
FC-1050-CS 1/2" thick plate
FC-10100-CS 1" thck plate
